ABB VSN300 Product Manual page 34

The IP address assigned may
vary for reasons connected to
the Wi-Fi home router setup (for
example, a very brief DHCP lease
time). If verification of the address
is required, it is usually possible
to obtain the client list (and the
corresponding IP addresses) from
the administrative panel of the Wi-
Fi router.
Contact the network administrator
for further information regarding
the presence or absence of the
DNS service in the Wi-Fi router or
how to enable it.
If the connection is completed successfully, the screen updates and
displays a message and a green box.
The message provides the link required for the second stage of the
installation procedure (corresponding to the IP address assigned by the
router of the home Wi-Fi network of the board).
This IP address can be used each time you want to access the integrated
web server, with the board connected to the home network.
As well as the IP address, the «Host Name» (identified in the green box)
can also be used to connect to the board.
In order to use the «Host Name» as an alternative to the dynamic IP
address, the Wi-Fi router to which the board is connected (when
operating in "Station Mode") must provide the Domain Name System
(DNS) service.
In this way, even if the IP address assigned to the VSN300 board should
change over time, (dynamic IP), it will always be possible to use the
same «Host Name» which will remain unchanged over time.
The Host Name can always be received but taking into consideration that
it is structured in the following way:
ABB-SSSSSS-PPPP-WWYY.LOCAL
where:
SSSSSS = Inverter serial number
PPPP = Inverter part number
WW= Inverter week of production
YY= Inverter year of production
- 34 -
5 - Installation