First System And User Setup - ABB VSN300 Product Manual

F
irst system and user setup
The most common causes of connection loss can be: different Wi-Fi network password,
faulty or unreachable router, replacing the router (different SSID) without the necessary
setting updates.
If the procedure is carried out
immediately after the previous
stage (without closing
browser), the assigned IP address
can be reached by using the link in
the green box.
The VSN300 board is now connected to the home Wi-Fi network,
becoming a normal host on a par with any other Wi-Fi device (for example
the user's tablet or PC).
The Wi-Fi board automatically disables its access point with the name
ABB-SSSSSS-PPPP-WWYY (no longer necessary). If the W-Fi board
loses the connection with the home Wi-Fi network (and therefore, loses
the internet connection), it will once again enable the access point
necessary for repeating the first setup stage.
Before proceeding with setup, check that the device being used is
connected to the same home Wi-Fi network to which the VSN300 board
has just been connected.
If the device is not connected, select the Wi-Fi network from those shown
in the list and connect the device to the network, entering the network
protection password if requested to.
Make sure that the connection has been completed successfully, open
the internet browser and enter the IP address assigned by the router at
the board identified previously.
the
- 35 -
5 - Installation