Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
7)
Place the bolts with fixed fittings into the four holes and tighten them slightly.
8)
Make sure the support is level and then cross-fasten the bolts of the lower
support to 45 N-m (400 in-lb) with a torque wrench.
IV. Leveling the Lower Support
See section 2.4.2 IV. "Leveling the Lower Support".
V. Conducting Insulation Test
See section 2.4.2 V. "Conducting Insulation Test".
Huawei Technologies Proprietary
2-22
Chapter 2 Installing Cabinet Assemblies