Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
This chapter introduces the types of cables to be installed, the procedures of
installing cables, and related precautions.
Note:
Cables on the backplane of the cabinet are installed and checked before delivery.
Thus, you do not need to install these cables on site. For details, see Airbridge
BTS3606&3606A CDMA Base Station Hardware Description Manual. Installation of
feeders is introduced separately in Airbridge BTS3606&3606A CDMA Base Station
Installation Manual – Antenna & Feeder Installation.
4.1 Types and Functions of Cables to Be Installed on Site
Table 4-1 describes cables to be installed on site.
Table 4-1 Cables to be installed on site
Type
RF cables
Chapter 4 Installing Cables
Description
RF cables between
CDDU/CHPA/CTRM.
RF cables between
CDDU/CMPA/CMTR.
Jumpers between the
cable inlet of the
cabinet and feeders
Huawei Technologies Proprietary
Color
Black
Black
Black
4-1
Chapter 4 Installing Cables
Specifications
1/4 in. The two ends of a
jumper are DIN
connectors. The external
connector is a DIN-female
connector.
1/4 in. The two ends of a
RF cable are DIN
connectors. The external
connector is a DIN-female
connector.
1/2 in. The two ends of a
jumper are DIN
connectors.