Hitachi AMS 2100 Hardware Manual page 275

4. As shown in the following illustration, in the Array List window, either
click the name of the array whose firmware you want to update, or click
the checkbox and then click Show and Configure Array.
•
5. The Array Window (shown below) is displayed. In the Common Array
Tasks section of the Array window, click Update Firmware. This
launches the Upgrade Firmware wizard. The wizard contains step-by-
step instructions to upgrade the firmware on the AMS 2100/2300.
•
For detailed instructions and further information, see the help page in the
Navigator 2 online help system. Click Help on any screen in the wizard to
access the help for the wizard.
Upgrading the firmware
Hitachi AMS 2100/2300 Storage System Hardware Guide
10–3