Upgrading The Software - Hitachi AMS 2100 Hardware Manual

9. To return to the Basic tab, click Basic. Make any changes to the settings
as needed. Otherwise click OK. (Skip to step 12.)
10. Next to Update file, click Browse. Then navigate to the location where
the firmware file resides, click the file, and click the Open button. The
path and filename appear in the Browse field.
11. In the Update Firmware dialog box, click OK. The following confirmation
window appears:
12. Read the information in the window. Then click the checkbox Yes, I
have read the above warning and agree to update the firmware.
13. Click the Confirm button to proceed. A window similar to the following
appears as the firmware is updated. The window shows the approximate
time required to update the firmware.
•
CAUTION! Do not cancel the upgrade procedure or have the AMS
2100/2300 perform I/O operations while the firmware is being
upgraded.
14. After the firmware has been updated, a message informs you that the
operation has been completed successfully. Click Close to confirm the
message and close the message box. The array can then return to
normal operation.

Upgrading the software

The instructions to upgrade the storage management software (Hitachi
Storage navigator Modular 2) are located in
Upgrading the firmware
Hitachi AMS 2100/2300 Storage System Hardware Guide
Chapter 7, Configuration.
10–5