Main Screen; Normal Display; Zoom Display - ABB 2CSYK1201C Product Manual

Mylos knx
Table of Contents

Advertisement

MYLOS
Building Automation
®
3.2

Main screen

The Programmable Thermostat main screen gives information about the temperature regulation of the system.
If the Programmable Thermostat is set in automatic operation (default), two different displays are possible: Normal
and Zoom are the ones displayed when the device is in automatic operation.
3.2.1

Normal Display

The display shows the date, hour, the temperature measured and the setpoint temperature.
Pressing and releasing one of the 4 front push-buttons the following functions will be displayed:
Mode
Repeatedly press the Mode push-button to modify the active
temperature regulation setting:
- AUTOMATIC OPERATION: it is the normal operating mode.
The Programmable Thermostat carries out temperature
adjustment based on a set temporal program;
- STANDBY MODE (heating): the ambient temperature is
reduced (e.g. during temporary absence) to save heating
costs. The comfort temperature can be restored quickly
when necessary. Standby mode (cooling): the ambient
temperature is increased (e.g. during temporary absence) to
save heating costs. The comfort temperature can be restored
quickly when necessary;
- SYSTEM OFF: all temperature regulation functions are
disabled;
- MANUAL OPERATION: the setpoint temperature that has
been set manually is kept.
Once the desired function has been selected wait a few seconds
so that it activates.
The display will show the selection made.
1
It allows you to manually adjust the setpoint temperature
0
Menu
You access the Programmable Thermostat menu which allows
you to define all parameters relating to temperature regulation
and to carry out the MYLOS Building Automation system
configuration.
3.2.2

Zoom Display

The display shows the temperature temporal course based on the program active in automatic operation.
The following function keys are shown:
Exit
To go back to the previous menu
2
To move along the 45-minute temporal line and display setpoint
temperature course.
3
It displays the following day.
5
Main configurations
MYLOS
04.04.11
MON. 12:17
26
.5
C
SET 15.5
(GRAPH)
04.04.11
MON. 12:17
26
.5
C
SET 15.5
Mode
1
0
MONDAY
21.0
18.0
15.0
0 1 2 3 4
Exit
2
3
Building Automation | Main configurations 11
®
Menu
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

2csyk1201s

Table of Contents