Commissioning; Parameters; Parameter Window "General - ABB 2CSYK1201C Product Manual

MYLOS Building Automation
®
6

Commissioning

6.1

Parameters

6.1.1

Parameter window "General"

Cyclic sending "In operation" object
Options:
- No
- Cyclic sending value "0"
- Cyclic sending value "1"
The "In operation" object reports to the bus that the device is operating correctly. This periodic message can be
monitored by an external device.
The following parameters are shown:
- transmission period in s [1...65.535]
- Options: - 1...60...65.535
The period at which the "In operation" object sends a message periodically is set here.
Enable switchover of temperature display via button °C/°F
Options:
- °Celsius
- °Fahrenheit
This parameter enables the °C/°F push-switch. The user can then switch the temperature display from °C to °F. The
temperature is always converted from °C to °F in the temperature controller with display, because only °C values
can be sent to the KNX.
20 Commissioning | MYLOS Building Automation
®
Commissioning