ABB 2CSYK1201C Product Manual page 19

MYLOS Building Automation
®
5) Select PROGRAM and press OK;
6) With the arrows 0 1 select the day that you wish to customise (ex. MONDAY) and press OK;
7) select MODIFY and press OK;
ENABLED
PROGRAM
Exit
0
The display shows the graph representing the temporal course of ON and OFF statuses during the day.
- In the upper part the day and hour in which the status will be applied are displayed.
- In the central part the graph with ON and OFF statuses is displayed.
- In the lower part the following function keys are displayed:
select NO to exit without saving or YES to save the changes.
Exit
The message DONE confirms that the changes have been saved.
they allow you to select the time interval in which the event can be
2
activated or deactivated (ex. 02:00 → 02:00).
3
it allows you to select the ON or OFF status.
4
8) use the arrows to move forward on the temporal axes and set the status course for the whole day.
9) exit and save; the display shows the window for temporal course of PROGRAM 1, MONDAY.
It is now possible to manually set another day or to copy it from an existing day:
1) with the arrows 0 1 select the day that you wish to customise (ex. TUESDAY) and press OK;
2) select COPY FROM DAY and press OK;
3) using the arrows 0 1 select the day to be copied (ex. MONDAY).
The MONDAY programming will be copied on TUESDAY.
4) press OK to confirm; the message DONE confirms that the changes have been saved.
USER 1Y
TUESDAY
Exit OK
0 1
Event management
MONDAY
Exit
OK
0
MODIFY
COPY FROM DAY
Exit OK
0
USER 1
OK
1
Copy: MONDAY
On: TUESDAY
Exit OK
0
MYLOS
MODIFY
COPY FROM DAY
Exit OK
0
MON. 02:00 → 02:15
ON
OFF
0 1 2 3 4
Exit
2
DONE
Building Automation | Event management 19
®
3 4