ABB 2CSYK1201C Product Manual page 47

MYLOS Building Automation
®
The Programmable Thermostat can control up to three remote thermostats depending on the modes settable from
parameters.
Enable area x
Options:
- No
- Yes
Area x control mode
Options:
- Mode
- Setpoint only
- Setpoint + comfort
The Enable zone x parameter enables the control of the three possible thermostats.
The Zone x control mode parameter allows you to select the mode in which the Programmable Thermostat can send
control telegrams to the thermostat. The Mode parameter indicates the sending only for messages indicating the
current operating mode of the Programmable Thermostat (auto, comfort, standby...). Setpoint only sends only the
setpoint value currently selected on the Programmable Thermostat. Setpoint + comfort sends the Programmable
Thermostat setpoint and the comfort operating mode.
Commissioning
MYLOS Building Automation | Commissioning 47
®