Select Menu - ABB 2CSYK1201C Product Manual

MYLOS Building Automation
®
5) select the desired setpoint temperature level, then move forward on the temporal axis using the arrows.
Press the key 4 when you wish to change the temperature level.
Proceed in this way to create the temporal course for the entire day.
6) exit and save; the display shows the window for temporal course of USER 1, MONDAY.
It is now possible to manually set another day or to copy it from an existing day:
1) with the arrows 0 1 select the day that you wish to customise (ex. TUESDAY) and press OK;
2) select COPY FROM DAY and press OK;
3) using the arrows 0 1 select the day to be copied (ex. MONDAY).
The MONDAY programming will be copied on TUESDAY.
4) press OK to confirm; the message DONE confirms that the changes have been saved.
USER 1
TUESDAY
Exit OK
0 1
4.1.2

SELECT Menu

It allows you to choose the thermostat (local or remote) that you want to use and the temporal program it should be
associated with;
1) select SELECT and press OK;
2) select LOCAL to use the thermostat you are adjusting or REMOTE A, B, C, to adjust possible thermostats
located in other rooms, then press OK.
The following description applies to both LOCAL and REMOTE sub-menus.
3) choose among the possible temporal programs displayed and press OK:
- FIXED 1, 2, 3: they are preset temporal courses that cannot be modified and that can be used as an
alternative to customised courses.
- USER 1,2,3,4: they are the temporal courses that can be set by the user as described in
4) the graph with the course of the first day of the week is displayed; using the arrows 0 1 it is possible to display
all other days and to verify if they correspond to the desired course.
5) press Exit to exit or OK to confirm; a confirmation message will be displayed and the symbol  will appear
near the programming.
SELECT
CUSTOMISE
Exit OK
0
16 Air-conditioning control | MYLOS
MODIFY
COPY FROM DAY
Exit OK
0
LOCAL
REMOTE A
REMOTE B
REMOTE C
Exit OK
0
Building Automation
®
Air-conditioning control
Copy: MONDAY
On: TUESDAY
Exit
0
 FIXED 1
FIXED 2
FIXED 3
USER 1
Exit See
0 1
DONE
OK
"CUSTOMISE
FIXED 1
MONDAY
Exit
0 1
Menu".
OK