Technical Features; Technical Data - ABB 2CSYK1201C Product Manual

Mylos knx
Table of Contents

Advertisement

MYLOS
Building Automation
®
2

Technical features

04.04.11
MON. 12:17
26
.5
C
SET 15.5
(GRAPH)
2.1

Technical data

Power supply
Connections
Control and display elements
Protection
Protection class
Temperature range
Ambient condition
Type, case, design
Installation
Licence
The Programmable Thermostat is a flash-mounted device for the ABB's Mylos Building
Automation system. It can be programmed on a weekly basis, for the control of
heating/cooling systems over the KNX bus.
It allows you to adjust the temperature using the 2-step control (ON/OFF), with Pulse-width
modulation (PWM) or Proportional integral (PI).
The ambient temperature controller is fitted with push-switches and an LC display to show
the current operating modes and values.
A bus terminal is included for connection to the KNX. A separate bus coupling unit is not
required.
- Bus voltage
- Current consumption
- KNX
- Temperature sensors
- LCD display
- "fan stage adjustment"
- °F/°C switching
- IP 20
- III
- Use
- Storage
- Transport
- maximum relative humidity
- Maximum air pressure
- device with integrated bus coupler (no
additional supply voltage)
- Dimensions HxWxD
- Colour
- RoHs-compliant and halogen-free
- monoblock device, bus connection
- KNX acc. to EN 50 090-1, -2
Technical features
21...30 V DC over the bus
Type, 10 mA
Bus terminal
Accuracy of temperature sensor +/- 0.5 K
(can be calibrated by parameters)
Sensor type: NTC
The LCD can be lighted if required.
Use the "Lighting Display" parameter. This
allows the LCD lighting to be always on or
always off, or to be lighted after pushing a
switch and remain on for 5 seconds.
When the switch is pressed, the device runs
through the sequence "1 2 3 Auto 0 1 ..."
starting from the current fan stage. If the fan is
set to automatic, this is deactivated when the
switch is first pressed and the next fan stage
is activated-
This push-switch switches the display between
°C and °F.
Acc. to DIN EN 60529
Acc. to DIN EN 61140
- 5°C...+45°C
-25°C...+55°C
-25°C...+70°C
93% non-condensing
equivalent to 2000 m
Case: 44x44x43 mm
Display: 30x20 mm
white, black
MYLOS
Building Automation | Technical features 5
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

2csyk1201s

Table of Contents