Table of Contents
Advertisement
MYLOS
Building Automation
®
2.4
Assembly and installation
The thermostat with display is a flash-mounted device with an integrated bus coupler. The device operates without
additional supply voltage.
Selection of a suitable installation location for the controller and suitable parameter settings are essential for good
temperature detection.
- The ambient temperature controller should be
installed approximately 150 cm above the floor and
50 cm from the door frame.
- The ambient temperature controller should be
installed on a wall opposite the radiator.
- The radiator and the ambient temperature controller
must not be separated by corners in the room.
- An ambient temperature controller should not be
installed near a radiator or behind curtains.
- It should also not be installed on an exterior wall
because low outside temperatures will influence
the temperature detection.
8 Technical features | MYLOS
Building Automation
®
Technical features
Advertisement
Table of Contents
