Toshiba Tosvert VF-S15 Series Instruction Manual page 15

 Block Write 1, 2
Select data, which is desired to be written in block communication, in block write Data 1 and 2 Pa-
rameters (f870, f871). This parameter becomes effective when the system is reset, such as
when power is turned off. When the setting is completed, turn off and then on the power.
No. Block write data
0 No selection
1 Communication command 1 (FA00)
2 Communication command 2 (FA20)
3 Frequency command value (FA01)
4 Output data on the terminal board (FA50)
5 FM analog output (FA51)
6 Motor speed command (FA13)
* When "No selection" is specified in the parameters, no data will be written even though write data
is specified.
 Block Read 1 to 5
Select read data, which is desired to be read in block communication, in block read data 1 and 5
Parameters (f875 to f879). This parameter becomes effective when the system is reset,
such as when power is turned off. When the setting is completed, turn off and then on the power.
No. Block read data
0 No selection
1 Status information 1 (FD01)
2 Output frequency (FD00)
3 Output current (FD03)
4 Output voltage (FD05)
5 Alarm information (FC91)
6 PID feedback value (FD22)
7 Input terminal monitor (FD06)
8 Output terminal monitor (FD07)
9 Terminal VIA monitor (FE35)
10 Terminal VIB monitor (FE36)
11 Terminal VIC monitor (FE37)
12 Input voltage (FD04)
13 Motor speed (FE90)
14 Torque (FD18)
* "0000" will be returned as dummy data, if "0 (No selection)" is selected for the parameter and
"read" is specified.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
For data details, see:
-
"8.1. Command by communication"
For data details, see:
-
"8.2. Monitoring from communication"
"9. Parameter data"
"8.2. Monitoring from communication"
"9. Parameter data"
"8.2. Monitoring from communication"
14
E6581913