Toshiba Tosvert VF-S15 Series Instruction Manual page 60


Status information 1 (FD01, FE01)
Status information 1 (current status): "Communication Number FD01"
Status information 1 (status immediately before the occurrence of a trip): "Communication No. FE01"
Bit Specifications
0 Failure FL
1 Failure
2 Alarm
Under voltage(  )
3
4 Motor section (1 or 2)
(THR 2 selection)
5 PID control OFF
6 Acceleration/deceleration
pattern selection (1 or 2)
7 DC braking
8 Jog run
9 Forward/reverse run
10 Run/stop
11 Coast stop (ST=OFF)
12 Emergency stop
13 Standby ST=ON
14 Standby
15 (Undefined)
Note: The bit described "Undefined" is unstable. Don't use the bit for the judgment.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
0
No output Output in progress
Not tripped Tripped
No alarm Alarm issued
Normal Under voltage
Motor 2 (THR 2) THR1 : pt =setting value,
Motor 1 (THR 1)
PID control PID control
permitted prohibited
Acceleration/ Acceleration/
deceleration deceleration pat-
pattern 1 (AD 1) tern 2 (AD 2)
OFF Forced DC braking
OFF Jog run
Forward run Reverse run
Stop Run
ST=ON ST=OFF
Not emergency Emergency stop
stop status status
Start-up process Standby
Start-up process Standby
-
59
1 Remarks
Trip statuses include rtry
and trip retention status.
vl , vlv , vb , thr
THR2 : pt = 0 , f170 ,
f171 , f172 , f173
AD1 : acc , dec
AD2 : f500 , f501
Standby: Initialization completed,
not failure stop status, not alarm
stop status (MOFF, LL forced
stop), ST=ON, and RUN=ON
Standby: Initialization completed,
not failure stop status, and not
alarm stop status (MOFF, LL
forced stop )
-
E6581913