Installation Guide
QX-S6600 Series Ethernet Switches
10.3.2 SFP+ port LED
Each SFP+ port has a status LED to show port operating status and activities.
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
10.3.3 QSFP+ port LED
Each QSFP+ port has a status LED to show port operating status and activities.
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
10.3.4 Management Ethernet port LEDs
A management Ethernet port has one LINK LED and one ACT LED to show its link and data
transmission status.
Table 10-15 SFP+ port LED description
A transceiver module or cable has been correctly installed. The port has a link and is
operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and is
operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
Table 10-16 QSFP+ port LED description
A transceiver module or cable has been correctly installed. The port has a link and is
operating at 40 Gbps.
The port is sending or receiving data at 40 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and is
operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
10-16
10 Appendix C Ports and LEDs
Description
Description