Upgrading The Software Images - NEC QX-S6648XP-6Q Installation Manual

Installation Guide
QX-S6600 Series Ethernet Switches
Start to copy usba:/newest.ipe to flash:/newest.ipe... Done.

6.4.3 Upgrading the software images

To upgrade the software images:
1) Specify the upgrading image file (newest.ipe in this example) used at the next startup
for the master switch, and assign the M attribute to the boot and system images in the
file.
<Switch> boot-loader file flash:/newest.ipe slot 1 main
Images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to target slot.
The specified file list will be used as the main startup software images at the
next reboot on slot 1.
2) Specify the upgrading image file used at next startup for the Standby switch, and
assign the M attribute to the boot and system images in the file. (As a result, the
Standby switch automatically copies the file to the root directory in its Flash memory.)
CAUTION:
When a ".ipe" file was designated as the image file used to start next time by the Standby switch, developed
Boot image file and System software image file are copied in the Standby switch automatically. a ".ipe" file isn't
copied by the Standby switch automatically. When a ".ipe" file is necessary to the Standby switch, it's
necessary to copy manually.
<Switch> boot-loader file flash:/newest.ipe slot 2 main
Images in IPE:
boot.bin
system.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to target slot.
6-9
6 Upgrading software