NEC QX-S6648XP-6Q Installation Manual page 83

Installation Guide
QX-S6600 Series Ethernet Switches
Please input the file attribute (Main/Backup/None) M
The boot.bin image is self-decompressing...
Free space: 534980608 bytes
Writing
flash...................................................................
........................................................................
...................................................................
Done!
The system.bin image is self-decompressing...
Free space: 525981696 bytes
Writing
flash...................................................................
........................................................................
........................................................................
........................................................................
.........................................................................
.........................................................................
.......................................................................
Done!
 NOTE:
The switch always attempts to boot first with the main images, and if the attempt fails,

for example, because the main images are not available, the switch tries to boot with the
backup images. An image with the none attribute is just stored in Flash memory for
backup and you must change its attribute to make it usable at reboot.
If an image with the same attribute as the image you are loading is already in Flash

memory, the attribute of the old image changes to none after the new image becomes
valid.
Enter 0 in the Boot menu to reboot the switch with the new software images.
6)
BOOT MENU
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6-17
6 Upgrading software