Connecting The Power Cord; Connecting The Lsvm3Ac650/Psr450-12A-N Power Module - NEC QX-S6648XP-6Q Installation Manual

Installation Guide
QX-S6600 Series Ethernet Switches
(1) Pivot the latch to the right with your thumb
 NOTE:
If you do not insert another power module into the slot after removing the power module, install the blank panel
to the power module slot to prevent dust from entering the chassis.

Connecting the power cord

Warning:
When fixing power cable on equipment, please can cut a power supply of equipment anytime in the state which
reaches a plug of power cable and an outlet right now.

3.5.1 Connecting the LSVM3AC650/PSR450-12A-N power module

1) Insert the female connector of the AC power cord supplied with the power module into
the power receptacle on the power module.
2) Use a cable tie to secure the power cord to the handle of the power module, as shown
Removing the power module
(2) Pull the power module out
3-21
3 Installing the switch