Table of Contents
Advertisement
Installation Guide
QX-S6600 Series Ethernet Switches
2. Set configuration file
0. Return to boot menu
Enter your choice(0-2): 1
File Number File Size(bytes) File Name
=============================================================================
1(*) 7913472 flash:/system.bin
2(*) 8996864 flash:/boot.bin
3 8996864 flash:/boot-update.bin
4 23129088 flash:/system-update.bin
Free space: 461413664 bytes
(*)-with main attribute
(b)-with backup attribute
(*b)-with both main and backup attribute
4)
Enter the number of the file you are working with. For example, enter 3 to select the
boot image boot-update.bin.
Please input the file number to change: 3
5)
Enter M or B to change its attribute to main or backup. If you change its attribute to M,
the attribute of boot.bin changes to none.
Please input the file attribute (Main/Backup/None) M
This operation may take several minutes. Please wait....
Next time, boot-update.bin will become default boot file!
6)
At the prompt, enter Y to reboot the switch with the new main boot image or enter N to
return to the Boot menu.
Do you want to run boot-update.bin now? Yes or No (Y/N): Y
Loading the main images...
Starting to get the image flash:/boot-update.bin................................
.............................................................................
.............................................................................
...........Done!
Handling software upgrade failures
If a software upgrade fails, the system runs the old software version.
To handle a software upgrade failure:
6-32
6 Upgrading software
Advertisement
Chapters
Table of Contents
