Installation Guide
QX-S6600 Series Ethernet Switches
in Figure 3-23.
3)
Connect the other end of the power cord to an AC power outlet.
NOTE:
Use the AC power cord which comply the standard of each country.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
For the cables complying with our specifications, see 9.1 Hot swappable power
modules, Table 3-1, and Table 3-2.
100VAC, 120VAC, 220-230VAC, 240VAC
Connector(on the Device Side)
IEC-320-C13
IEC-320-C13
Table 3-1 AC Input Power Specifications
Input Voltage
Table 3-2 Power Cable Specifications
Cable Ratings
125V, 10A
250V, 10A
Current (Max.)
Phase
10A/5A
Single
Cable Length
Comply the standard of
each country
Comply the standard of
each country
3-22
3 Installing the switch
Frequency (Hz)
50/60
Plug(Power Facility)
Comply the standard of
each country
Comply the standard of
each country