CHAPTER 3
INSTALLATION
1. GENERAL
This chapter explains the procedure for installing the MCI on the PBX. For the connection of VMS, refer to the
appropriate VMS manuals.
2. PRECAUTION IN HANDLING
You must wear a grounded wrist strap to protect the circuit card from static electricity. Also, when handling
cards, work on a grounded, conductive work surface.
• WHEN PLUGGING/UNPLUGGING A CIRCUIT CARD
WRIST STRAP
• WHEN HOLDING A CIRCUIT CARD
PBX
FRAME GROUND SCREW
CONNECT THE GROUND WIRE TO THE
FRAME EARTH OF THE EQUIPMENT
Figure 3-1 Static Electricity Guard (1/2)
ND-45895 (E)
Addendum-001
JULY, 1997
NEVER TOUCH THE COMPONENTS
OR SOLDERED SURFACE WITH
BARE HANDS.
CARD FRONT
INSTALLATION
CHAPTER 3
Page 13
Revision 1.1