NEC Neax 2000 IVS System Manual page 41

A
CM90 Assign the data to provide the MW lamp on a
term
D , if required.
CMD000 Specify whether the text (Message Waiting
control text sending is available) is sent to the
VMS when resetting the PN-AP00.
Specify the number of digits for the station
number in the message format to communi-
cate with the VMS.
Specify the MCI for the No. 3 port on the
PN-AP00.
Note: The No. 3 port can be connected only to
the VMS for which the RTS signal from
the PN-AP00 is not needed.
B
DESCRIPTION
ND-45895 (E)
Addendum-001
JULY, 1997
SYSTEM DATA PROGRAMMING
DATA
• YY=00
,
(1) My Line No. + + Key No.
(2) F1005
(1) 136
(2) 0 /1 : To be sent/Not to be sent
(1) 137
(2) 0 /1 : 6 digits/8 digits
(1) 138
(2) 0 /1 : Not to be provided/To be
provided
CHAPTER 4
Page 35
Revision 1.1