Initialization Form For I/O Type - Siemens SIMATIC S5 Manual

S5-115F Manual
I/O Type 9
S5-115F: Configuring the I/O Modules
Bits
DQ W 14
DQ W 16
Digital number
Type number
Num. of I/O Channels : 2
Safety-related
Intermittent
Feedback module required :
Readback DI 2-channel
Status: TYPE INPUT
F1
SEARCH
• An intermittent signal must be subject to sufficiently frequent status changes detectable by
the CPU. For this purpose, the signal must assume the states "0" and "1" for a period greater
than the PLC cycle time at least once within the second error occurrence time.
• Only one access type and one signal group are permissible within one output word.
• DQ modules and R DI modules are assigned to each other wordwise.
Example:
DQs
38.0 38.1 38.2
R DIs
40.0 40.1 40.2
Note
When using DI/DQ module 482, outputs and readback inputs must always have the
same address.
• Signal group ( Vol 1, 10.17 of the Manual)
The following overview shows the relationship between error responses and the selected
signal group.
EWA 4NEB 811 6149-02
0 1 2 3 4 5
9 9 9 9 9 9
14.0
: 9 DB number
Signal group
: Yes RB DI Byte addr. (0 to 127):
: Yes
F2 F3 F4
COPY SWAP DELETE
Figure 1-27. Initialization Form for I/O Type 9
38.3 38.4 38.5 38.6
40.3 40.4 40.5 40.6
COM 115F / PDC15
6 7 0 1 2 3
9 9 9 9 9 9
(4 to 255):
(0 to 28):
F5 F6
TYPES SAVE
38.7 39.0 39.1 39.2
40.7 41.0 41.1 41.2
Configuring with COM 115F
4 5 6 7
9 9 9 9
19
10
40
F7 F8
RETURN
39.3 39.4 39.5 39.6
41.3 41.4 41.5 41.6
39.7
41.7
1-41