Documentation With Com 115F; Main Menu Of The Printout Package - Siemens SIMATIC S5 Manual

Configuring with COM 115F
1.3

Documentation with COM 115F

The program section of COM 115F contains the following packages:
• COM 115F CONFIGURE
• COM 115F DOCUMENT for
- Safety-related readout of configured data from the PLC
- Printout of the data in the programmer.
Note
For the individual Licensing Authority acceptance tests, it is essential that you are able
to print out the configuration data with COM 115F DOCUMENT and that you can com-
pare the printout with the configured data.
Proceed as follows to start COM 115F DOCUMENT:
Select the desired menu from the "Package selection" menu using the cursor control keys:
- COM 115F DOCUMENT
Confirm your choice with the F1 "PACKAGE" key.
The package will appear with the "DEFAULTS" screen form ( Figure 1-2).
Confirm the defaults with the F6 "EXEC" key.
The main menu will then appear.
If you also press the HELP key, the following form appears on your screen.
PRINTING THE S5 115F PARAMETERS
F1 ALL C DB
F2 I/O TYPES :
F3 DB 1
F4
F5
F6
F7
F8 RETURN
F1
ALL C DB I/O TYPES
1-52
PROGRAM FILE:A:@@@@@@ST.S5D
: Print all configuration DBs
Print a specific I/O type
: Print DB 1
:
:
:
:
: Exit COM 115F DOCUMENT
F2 F3 F4
DB 1
Figure 1-35. Main Menu of the Printout Package
COM 115F / PDC15
F5 F6 F7
PRG DAT DEFAULTS AUX
S5-115F Manual
F8
RETURN
EWA 4NEB 811 6149-02