Motor Protection Parameters - ABB UMC100.3 Manual

T H E LC D C O N T R O L PA N E L U M C 1 0 0 - PA N

Motor Protection Parameters

Within this submenu all motor protection related parameters can be configured.
The diagram below shows the organisation of the different parameter masks in the menu tree.
The parameters are described in detail in the section "Parameters and Data Structures on a Fieldbus->Parameter
Organisation-> Motor Protection Parameters".
2 Protection
2.1 Setting Ie 1
2.2 Setting Ie 2*
2.3 Trip class
2.4
Current factor
2.5
PTC
2.6
Cooling mode
2.7 Cooling time
2.8 Restart level %
2.9 Locked rotor (LR)
2.10 Thermal load warnlev
2.11 Phases
2.12 Over/under current
2.13 Int. earthfault
2.14 Voltage DIP**
2.15 Over/under voltage**
2.16 Voltage imbalance**
2.17 Load startup delay**
2.18 Over/under power**
2.19 Power factor**
2.20 Power quality**
*) Polechanging starter only
**) With voltage module only
2.9 Locked Rotor
2.9.1 LR trip level
2.9.2 LR trip delay
2.11 Phases
2.11.1
Phase loss protect.
2.11.2 Phase imb. trip lev.
2.11.3 Phase imb. warn lev.
2.11.4 Phase reversal
2.11.5 Check phase sequence
2.12 Over / under current
2.12.1
Low curr trip level
2.12.2 Low curr trip delay
2.12.3 Low curr warn level
2.12.4 Low curr warn delay
2.12.5 High curr trip level
2.12.6 High curr trip delay
2.12.7
High curr warn level
2.12.8
High curr warn delay
2.13 Int. earthfault
2.13.1 Earth flt. trip lev.
2.13.2 Earth flt. trip delay
2.13.3 Earth flt. warn lev.
2.13.4
Earth flt. warn delay
2.13.5
Earth fault detection
2.14 Voltage DIP
2.14.1 Enable voltage DIP
2.14.2 Voltage DIP duration
2.14.3 Autorestart enable
2.14.4
Autorestart window
2.14.5
Autorestart delay
2.14.6
DIP restart level
2.14.7 DIP level
2.15 Over / under voltage
2.15.1 U low trip level
2.15.2 U low trip delay
2.15.3 U low warn level
2.15.4 U low warn delay
2.15.5 U high trip level
2.15.6
U high trip delay
2.15.7
U high warn level
2.15.8
U high warn delay
2.16 Voltage imbalance
2.16.1 U imb trip level
2.16.2 U imb trip delay
2.16.3
U imb warn level
2.16.4
U imb warn delay
2.18 Over / under power
2.18.1 P low trip level
2.18.2 P low trip delay
2.18.3 P low warn level
2.18.4
P low warn delay
2.18.5
P high trip level
2.18.6 P high trip delay
2.18.7 P high warn level
2.18.8 P high warn delay
2.19 Power factor
2.19.1
PwrFactor trip level
2.19.2
PwrFactor trip delay
2.19.3 PwrFactor warn level
2.19.4 PwrFactor warn delay
2.20 Power quality
2.20.1 THD warn level
2.20.2
THD warn delay
105