ABB PST30 Installation And Maintenance Manual page 31

5L3 B3
B2
B1 3L2
1L1
6T3
4T2
2T1
Figure 30: Download
Low Voltage Products & Systems
ABB nc. • 888-385-1221 • www.abb-control.com
Chapter 5
Connection
5:3.3.2 Downloading parameters
To download the parameters, connect the keypad to the chosen softstarter and select To Starter. A text
Load to Start will be displayed. Continue by pressing Execute and then Yes when the text Are You Sure is
displayed. Transfer OK will now be displayed if the transmission was successful; otherwise, Transfer Not OK
will be displayed. Set the parameter Setting le and confirm by pressing Next.
Information!
The parameters in the menu Service Settings will not be transferred.
To learn how to operate the keypad, see Chapter 6 "Human-Machine Interface (HMI)"
5:3.3.3 Technical data
Display
Signal indication LEDs
Ambient temperature
Degree of protection
UL approval
Marine approvals
LCD type
Power on: Green
Protection: Yellow
Fault: Red
Storage: -25°C to +70°C (-13°F to 158°F)
Operation: 0°C to +50°C (32°F to 122°F)
IP66
Type 1
Type 4X Indoor
Type 12
Contact your ABB sales office
5
5.9
1SXU 132 021 M0201