ABB PST30 Installation And Maintenance Manual page 36

Top level
Settings
Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings
Reset all settings
Operation mode
Local Control
Event Log
Status Information
Reset Events
Figure 20: Settings menu
Top level
Settings
Local Control
Event Log
Status Information
Reset Events
Figure 21: Local control menu
Low Voltage Products & Systems
ABB nc. • 888-385-1221 • www.abb-control.com
Chapter 6
Human-Machine nterface (HM)
6:2.3 Settings menu
The settings menu is used to set up the softstarter parameters for various applications.
Use the navigation keys to cycle through the various sub menus.
Function
Application setting
Basic settings
Functional settings
Service settings
All settings
Changed settings
Reset all settings
Operation mode
6:2.4 Local Control menu
The Local Control menu is used to start or stop the motor from the keypad. When local con-
Start / Stop
trol is selected, the softstarter can only be controlled by the keypad.
Jog
The previous type of control is activated when exiting local control.
Three different selections are possible (see the table below).
DOL Start
Press navigation keys to view different types of local control.
Information!
The LOCAL CONTROL menu can not be entered if Sequence start is selected.
Once the motor has been started in this menu, it must first be stopped before you leave the
menu. If the motor is already running when the menu is entered, it is possible to leave the
menu without stopping the motor.
Function
Start/stop
Jog
DOL start
(PSTB370...PSTB1050 only)
Description
Predefined parameters for typical ap-
plications
The basic and most used start/stop
settings
Language, date, time, etc.
Service and repair settings
A list with all possible settings
A list of all changed settings
Reset all settings to factory default
settings
Test mode for softstarter
Figure 20: Settings menu
Description
To start and stop the motor with the
keypad
To run the motor as long as Jog is
pressed
To start and stop the motor with the built-
in by-pass contactor. (See Chapter 3 for
AC3 ratings.)
Figure 21: Local control menu
6
6.5
1SXU 132 021 M0201