Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 154

■Basic settings
Set the network configuration settings and other parameters of the CC-Link IE Field Network master/local module. Display the
basic settings. Then, select and input parameters as shown below. Complete the input. Then, click the [Apply] button in the
lower right of the window. When setting "Network Configuration Settings", double-click the line of the network configuration
setting in the setting item window, or click the right-side button to be displayed when selecting the line.
Window
Displayed items
Setting classifications
Basic Settings Network Configuration
Settings
Refresh Settings
Network Topology
Operation setting when
the master station is
returned (settable only
when setting the
submaster station in a
network configuration)
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
152
5.2 System to Which Multiple Safety CPUs are Connected
Safety programmable
controller (1)
CCIEF master (2-0)
Refer to Network Configuration
Settings.
Refer to Refresh Settings.
Line topology, star topology, or
both are used
Return as Master Operation
Station
Safety programmable
controller (2)
CCIEF master (3-0)
Refer to Network Configuration
Settings.
Refer to Refresh Settings.
Line topology, star topology, or
both are used
Return as Master Operation
Station
Safety programmable
controller (3)
CCIEF master (4-0)
Refer to Network Configuration
Settings.
Refer to Refresh Settings.
Line topology, star topology, or
both are used
Return as Master Operation
Station