Table of Contents
Advertisement
1.3.
1.4.
1.5.
1.6.
6
COM600 series 5.1
Logic Processor User's Manual
access, interference, intrusion, leakage and/or theft of data or information. ABB is not
liable for damages and/or losses related to such security breaches, unauthorized access,
interference, intrusion, leakage and/or theft of data or information.
This document has been carefully checked by ABB but deviations cannot be completely
ruled out. In case any errors are detected, the reader is kindly requested to notify the
manufacturer. Other than under explicit contractual commitments, in no event shall ABB
be responsible or liable for any loss or damage resulting from the use of this manual or
the application of the equipment.
Conformity
This product complies with the directive of the Council of the European Communities
on the approximation of the laws of the Member States relating to electromagnetic
compatibility (EMC Directive 2004/108/EC) and concerning electrical equipment for
use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity
is the result of tests conducted by ABB in accordance with the product standards EN
50263 and EN 60255-26 for the EMC directive, and with the product standards EN
60255-1 and EN 60255-27 for the low voltage directive. The product is designed in
accordance with the international standards of the IEC 60255 series.
Trademarks
ABB is a registered trademark of ABB Group. All other brand or product names men-
tioned in this document may be trademarks or registered trademarks of their respective
holders.
General information
This user's manual provides thorough information on the Logic Processor OPC server
configuration for COM600.
Information in this user's manual is intended for application engineers who configure
the Logic Processor function in COM600. As a prerequisite, you should have basic
knowledge of logic programming and IEC 61131-3 standard.
Document conventions
The following conventions are used for the presentation of material:
•
The words in names of screen elements (for example, the title in the title bar of a
window, the label for a field of a dialog box) are initially capitalized.
•
Capital letters are used for the name of a keyboard key if it is labeled on the keyboard.
For example, press the ENTER key.
1MRS756738
Advertisement
Table of Contents
