Setting Device Path - ABB COM600 series 5.1 User Manual

3.3.4.
20
COM600 series 5.1
Logic Processor User's Manual
Figure 3.3.3-2 Selecting POU to add to main task

Setting device path

Before downloading a PLC Application to Logic Processor (CoDeSys Control Win V3
Runtime) in COM600, an active Device path must be set between Logic Editor and Logic
Processor.
To set active Device path between Logic Editor and Logic Processor:
1. Double-click the Device object available in Logic Editor. The configuration editor
for Device opens.
Figure 3.3.4-1 Device Configuration Editor
1MRS756738
Selecting_POU_MainTask.png
Device_Configuration_Editor.png