Home >
Scan
>
Scan Using the Scan Functions on Your Brother Machine
Your Computer
Save Scanned Documents on Your Computer
>> ADS-1200/ADS-1250W
>> ADS-1700W
ADS-1200/ADS-1250W
Use Brother iPrint&Scan to change scan settings, such as resolution, file size or scan type. Go to your model's
Downloads page on the Brother Solutions Center at
(ADS-1250W) If the machine and computer are connected wirelessly, configure the Scan to PC settings
using Remote Setup.
1. Load your document.
2. Press
(Scan to PC) on the control panel.
The machine starts scanning.
ADS-1700W
•
To change scan settings, such as resolution, file size or scan type, follow the steps below.
•
This procedure explains how to change the settings each time you scan documents. To use the same
settings every time, change the settings using Remote Setup.
1. Load your document.
2. Press d or c to display [to PC], and press it.
3. If multiple computers are connected to the machine, press a or b to display the destination computer you
want to save to, and press it.
4. To change the scan settings, press [Options]. Configure the following settings, and then press [OK]:
•
[Scan Settings]
•
[2-sided Scan]
•
[Scan Type]
•
[Resolution]
•
[File Type]
•
[Document Size]
•
[Skip Blank Page]
•
[Advanced Settings]
•
To configure other settings, press [Advanced Settings].
•
To save the settings as a shortcut, press [Save as Shortcut].
5. Press [Start].
The machine starts scanning.
Related Information
•
Scan Using the Scan Functions on Your Brother Machine
•
Brother iPrint&Scan for Windows
support.brother.com
®
and Mac
> Save Scanned Documents on
to download the latest application.
30