Home >
Scan
>
Scan Using the Scan Functions on Your Brother Machine
Scanned Data to an FTP Server
Upload Scanned Data to an FTP Server
Related Models: ADS-1700W
1. Load your document.
2. Press d or c to display [to FTP/SFTP], and press it.
3. Press a or b to select one of the FTP server profiles listed.
4. If the Scan to FTP profile is not complete, press [Options]. Configure the following settings, and then press
[OK]:
•
[2-sided Scan]
•
[Scan Type]
•
[Resolution]
•
[File Type]
•
[Document Size]
•
[File Size]
•
[Edge Fill For Plastic Card]
•
[Skip Blank Page]
•
[Advanced Settings]
•
To configure other settings, press [Advanced Settings].
•
To save the settings as a shortcut, press [Save as Shortcut].
•
If signed PDF was selected from the [File Type] drop-down list, you must configure the certificate
settings using Web Based Management.
•
[Edge Fill For Plastic Card] is only available when scanning from the Card Slot.
5. Press [Start].
The LCD displays the message [Connecting]. When the connection to the FTP server is successful, the
machine starts scanning.
Related Information
•
Scan to FTP
>
Scan to FTP
> Upload
43