Ach580 E-Clipse Bypass; Installation – Drive - ABB ACH580 Series Installation, Operation And Maintenance Manual

ACH580 Installation, Operation and Maintenance Manual

ACH580 E-Clipse Bypass

Installation – Drive
Follow the
warnings and instructions may cause a malfunction or personal hazard.
WARNING! Before you begin read
WARNING!
Torque Off (STO) functionality.
1) 100 HP @ 230V.
2) VCR and BCR are rated 600Y/347V unless otherwise specified. For use on a solidly
grounded Wye source only.
Installation instructions for the drive on page 8. Failure to observe the
Bypass configuration
Enclosure
Designation
V1 1 to 3 HP
V2 5 to 7.5 HP
V3
V4 15 to 25 HP
B1 1 to 7.5 HP
B2 10 to 25 HP
B3 30 to 100 HP
Safety instructions
s (ACH580-VxR & ACH580-BxR) do not support Safe
Horsepower Range by Voltage Rating
208V 460V
1 to 7.5 HP
10 to 15 HP
10 HP 20 to 30 HP
40 to 60 HP
1 to 15 HP
20 to 60 HP
1
75 to 200 HP
on page 2.
2
575V
N/A
2 to 15 HP
20 to 30 HP
N/A
2 to 15 HP
20 to 30 HP
40 to 150 HP
ACH580 E-Clipse Bypass
89