Complete Commissioning; Default Configurations — Hvac And Pid Control - ABB ACH580 Series Installation, Operation And Maintenance Manual

50

2. Complete commissioning

Default configurations — HVAC and PID Control
For more information on Default configurations, see pages 39,
1
2
3
4
Note: You can adjust Process PI(D) in the PID control
submenu of the Primary Settings menu after you have
commissioned the drive to use PID control.
ACH580-01 Installation
Press the Hand key to start the motor. The Home view is
shown on the panel. Select Menu (press on the soft key
under "Menu").
From the Main menu, select Primary settings.
Select Start, stop, reference and How do you control?
The default configurations are shown on the panel.
For HVAC, press Direct control via I/O.
For PID Control, press PID control, single motor.
ACH580 Installation, Operation and Maintenance Manual
40 and 44.