Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9
Dismantling and fitting
9.11
Fitting the diffuser
Figure 30: Fitting the diffuser
Part number
72041
Table 35: Tightening torque (72041)
1. Position the diffuser (79000) in the compressor casing (72000).
2. Rotate the diffuser until its bore is aligned with the bore in the compressor casing.
3. Fit and tighten screw (72041).
© Copyright 2016 ABB. All rights reserved.
TPS44
M5
5 Nm
HZTL4037_EN
TPS48
M5
5 Nm
Revision A
Page 74 / 99
TPS52
M6
10 Nm
August 2016