Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9
Dismantling and fitting
9.14
Fitting the turbine casing
Fitting the turbine casing
Figure 34: Fitting the turbine casing
Part number
51007
Table 37: Tightening torque (51007)
1. Coat the threads of the studs (51006) with high-temperature grease.
2. Turn the turbine casing (51000) by 180°.
3. Fit two swivel lifting eyes (01) on the turbine casing.
4. Place the turbine casing onto the cartridge group.
5. Align turbine casing to the marking.
6. Fit and tighten the fastening strips (51002) with Verbus Ripp® discs (51003) and hexagon
nuts (51007).
© Copyright 2016 ABB. All rights reserved.
TPS44
M8
30 Nm
HZTL4037_EN
TPS48
M8
30 Nm
Revision A
Page 78 / 99
TPS52
M10
60 Nm
August 2016