Xml Message Format - Mitsubishi Electric Melsec Q Series User Manual

9

XML MESSAGE FORMAT

CHAPTER 9 XML MESSAGE FORMAT
This section explains the XML message format used with the XML processing function.
Refer to the following for the XML processing function.
This section explains the functions of the XML message format.
(1) Instruction of job execution
9
- 1
Section 6.2 XML Processing Function
Function
One-shot execution
Validate
Invalidate
Table 9.1 Instruction of job execution
• Executes the specified job only one time regardless of whether the
trigger conditions and jobs are enabled or not.
• If the specified job is being executed, the job is not carried out again.
• Puts the job into the status in which the specified job is executed when
the trigger conditions are met (Job enabled status).
• This is the same operation as that of enabling the MES Interface
Function Configuration Tool job.
Section 7.13.4 Changing the job status
• Puts the job into the status in which the job is not executed even if the
trigger conditions are met (Job disabled status).
• This is the same operation as that of disabling the MES Interface
Function Configuration Tool job.
Section 7.13.4 Changing the job status
Description