Mitsubishi Electric Melsec Q Series User Manual page 225

7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(b) When [Value monitoring startup] is selected, specify conditions for comparison.
Figure 7.51 [Value monitoring startup]
1) Tag, Component
Select a tag component to be compared with.
Note that tags with [Array setting] are not selectable.
2) Condition
Select a condition for comparison.
Table 7.51 Selection items for [Condition]
Item
The tag component value is equal to the condition value.
The tag component value is not equal to the condition value.
The tag component value is equal to or greater than the condition value.
(Not selectable when [Data type] of the tag component is [Bit] or [String])
The tag component value is greater than the condition value.
(Not selectable when [Data type] of the tag component is [Bit] or [String])
The tag component value is smaller than the condition value.
(Not selectable when [Data type] of the tag component is [Bit] or [String])
The tag component value is equal to or smaller than the condition value.
(Not selectable when [Data type] of the tag component is [Bit] or [String])
3) Tag/Type
Select a tag or constant that is used as a condition for comparison.
Note that tags with [Array setting] are not selectable.
4) Component
Select or enter a component/constant value that is used as a condition for
comparison.
Description
7.10 Job Setting
7.10.2 Setting items in Trigger conditions
1
2
3
4
5
6
7
8
7
- 67