Mitsubishi Electric Melsec Q Series User Manual page 67

3
SPECIFICATIONS
MES interface
Network
module
module
Request
source
The network is any of CC IE Control, NET/10(H), Ethernet, or CC IE Field.
The following lists CPU modules that can be used on the network communication route and the communication routes
of other network types.
Request source
Relay station
Access target CPU
Network Co-existence
communication route network route
CC IE Control, NET/
CC-Link
*7
10(H), Ethernet
C24
*3
CC IE Field
MES interface Network
module module
Request
source
C24 multidrop
Network
CC-Link
communication
route
The network is any of CC IE Control, NET/10(H), Ethernet, or CC IE Field.
The following lists CPU modules that can be used on the network communication route and the communication
routes of other network types.
Request source
Relay station
Access target CPU
(b) Different network
Network 2 to 7
Relay Relay
Network 1
station station
Network communication route
Use a QCPU (Q mode) or RCPU as a control CPU for the MES interface module and network module.
Use a QCPU (Q mode) or RCPU as a control CPU for the network module.
For accessible CPU modules, refer to the following.
Figure 3.3 Different network
Table 3.6 Different network
QCPU
RCPU
*6
(Q mode)
Relay
Network 1
station
Co-existence network communication route
Use a QCPU (Q mode) or RCPU as a control CPU for the MES interface module and network module.
Use a QCPU (Q mode) or RCPU as a control CPU for the network module.
For accessible CPU modules, refer to the following.
Figure 3.4 Different network
C24 multidrop
CC-Link
Relay
Access target CPU
Network 8
station
Co-existence
network
communication
route
Access target CPU (PLC series)
*10
LCPU QnACPU
*11 *2
*11
×
Network 2 to 7
Relay Relay
Network 8
station station
3.2 Accessible Devices and Ranges
QCPU (A mode), C Controller
ACPU module
*2 *5
× ×
: Accessible ×: Inaccessible
Access target CPU
3
1
2
3
4
5
6
7
8
- 8