Accessible Devices And Ranges - Mitsubishi Electric Melsec Q Series User Manual

3
SPECIFICATIONS
(2) Accessible routes
MES interface Network
module module
Request
source
The network is any of CC IE Control, NET/10(H), Ethernet, or CC IE Field.
The following lists CPU modules that can be used on the network communication route.
Request source
Relay station
Access target CPU
Network communication
route
CC IE Control, NET/10(H)
*8
Ethernet
*4
CC IE Field
MES interface
module
Request
source
The following lists CPU modules that can be used on the network communication route.
Request source
Access target CPU
(a) Single network
Network 2 to 7
Relay Relay
Network 1
station station
Network communication route
Use a QCPU (Q mode) or RCPU as a control CPU for the MES interface module and network module.
Use a QCPU (Q mode) or RCPU as a control CPU for the network module.
For accessible CPU modules, refer to the following.
Figure 3.1 Single network
Table 3.4 Single network
*7 *11
QCPU (Q mode) RCPU
*12
*1 *1
*5
Network
module
Access target CPU
C24 multidrop
CC-Link
Network
communication
route
Use a QCPU (Q mode) or RCPU as a control CPU for the MES interface module and network module.
For accessible CPU modules, refer to the following.
Figure 3.2 Single network
Network 8 Access target CPU
Access target CPU (PLC series)
QCPU (A mode),
LCPU QnACPU
×
*1*10 *1 *2
×

3.2 Accessible Devices and Ranges

C Controller
ACPU module
*6
× ×
*9
×
: Accessible ×: Inaccessible
3
1
2
3
4
5
6
7
8
- 6