Panasonic AK-HRP200G Operating Instructions Manual page 30

Parts and their functions (when operating a camera recorder)
26.
ND filter/CC filter DISPLAY SELECT button <ND/CC>
SAVE/LOAD button <SAVE/LOAD> (In setup mode)
Press this button to display the setting values for the ND filter and
CC filter, to adjust ZOOM and FOCUS, to set AUTO FOCUS, and to
adjust VFR.
Each press of the button switches the change target.
ND filter
The ND filter display <ND> lights.
CC filter The CC filter display <CC> lights.
"Zo" is displayed on the setting display.
ZOOM
"Fo" is displayed on the setting display.
FOCUS
"AF. on" and "AF. of" are displayed
AUTO FOCUS
on the setting display.
Setting values are displayed on the
VFR
setting display.
The ND filter/CC filter adjustment value is displayed.
On (yellow): ZOOM/FOCUS/VFR can be adjusted.
AUTO FOCUS can be set.
A setting other than ND filter, CC filter, ZOOM, FOCUS,
Off:
AUTO FOCUS, and VFR is displayed.
<Note>
• ND filter, CC filter, ZOOM, FOCUS, AUTO FOCUS, and VFR are
not supported by all models.
• The adjustment speed of ZOOM and FOCUS can be adjusted with
the Sense control.
z Displaying and setting ND filter, CC filter, ZOOM, FOCUS,
AUTO FOCUS, and VFR
1) Press <ND/CC> when IRIS display or another (M.GAIN/M.
PED or SHUTTER) display is selected.
The ND filter display <ND> lights together with the <ND/CC>
button and the filter position is displayed.
2) Press <ND/CC> again.
Similarly, the CC filter display <CC> lights and the filter position
is displayed.
<Note>
Non-supporting models are indicated by "-".
3) Press <ND/CC> again.
The ND filter display <ND> turns off and "Zo" is displayed on
the setting display. Pressing and holding the lit DATA SET
button <UP> <DOWN> allows you to adjust ZOOM.
The adjustment speed of ZOOM can be adjusted with the
Sense control.
When ZOOM is selected, FOCUS can be adjusted with the
select dial <SELECT>.
4) Press <ND/CC> again.
"Fo" is displayed on the setting display. Pressing and holding
the lit DATA SET button <UP> <DOWN> allows you to adjust
FOCUS.
The adjustment speed of FOCUS can be adjusted with the
Sense control.
When FOCUS is selected, ZOOM can be adjusted with the
select dial <SELECT>.
5) Press <ND/CC> again.
"AF. on" or "AF. of" is displayed on the setting display. The lit
DATA SET button <UP><DOWN> allows you to select "AF. on"
or "AF. of."
6) Press <ND/CC> again.
The VFR setting values are displayed on the setting display.
"FroF" is displayed during VFR OFF.
The lit DATA SET button <UP><DOWN> allows you to select.
7) Press <ND/CC> again.
The setting display switches to the IRIS display status.
In setup mode, use this to switch submenus.
For details on setup mode, refer to Operations and Settings on the
supplied CD-ROM.
30
(continued)
27.
ND filter display <ND>
Lights when the ND filter position is displayed on the adjustment
value display.
Lit green: Standard position
Lit yellow: Other than standard position
28.
CC filter display <CC>
Lights when the CC filter position is displayed on the adjustment
value display.
Lit green: Standard position
Lit yellow: Other than standard position
<Note>
CC filter is not supported by all models.
29.
M.GAIN/M.PED DISPLAY SELECT button <M.GAIN/
M.PED>
EXIT button <EXIT> (In setup mode)
Press this button to display and change the M.GAIN or M.PED
settings.
M.PED settings are only displayed and adjustments cannot be made
with the DATA SET buttons <UP> <DOWN>. Make adjustments with
the master pedestal control <M.PED> of the iris lever.
z Displaying and setting M.GAIN/M.PED
1) Press <M.GAIN/M.PED> when IRIS display or another (ND/
CC or SHUTTER) display is selected.
The button lights and the M.GAIN display <M.GAIN> lights
green.
2) Press the lit DATA SET button <UP><DOWN>.
This allows you to change the M.GAIN setting.
3) Press <M.GAIN/M.PED> again.
The M.GAIN display <M.GAIN> turns off and the M.PED display
<M.PED> lights green.
4) Press <M.GAIN/M.PED> again.
The button turns off and the M.PED display <M.PED> turns off.
Then the setting display returns to IRIS indication.
<Note>
Use the master pedestal control to adjust M.PED. (This setting is
always available regardless of the display status)
Pressing another Display Select button (<ND/CC> or
<SHUTTER>) turns off the button and lights the selected button.
If you press and hold this button for about 2 seconds in setup mode,
setup mode ends.
For details on setup mode, refer to Operations and Settings on the
supplied CD-ROM.
30.
M.GAIN display <M.GAIN>
This display is lit green when an M.GAIN setting is displayed on the
setting display.
When M.GAIN is selected for adjustment, the M.GAIN display lights.
31.
M.PED display <M.PED>
This display is lit green when an M.PED setting is displayed on the
setting display.
Also, when the master pedestal control <M.PED> is operated while
something other than M.PED is displayed on the setting display, the
M.PED value will be displayed for about 2 seconds.
<Note>
Use the master pedestal control <M.PED> to adjust M.PED. (This
setting is always available regardless of the display status)