Panasonic AK-HRP200G Operating Instructions Manual page 39

System connection diagram
„ Serial connection (AW-HE50/AW-HE60)
„
Multi-interface cable
AW-CA20T6G
RJ-45 relay adapter
LAN cable (straight cable),
up to 1,000 m
External DC
power supply
12V IN LAN RS-422 PREVIEW
CCU
SIGNAL GND
AK-HRP200
„ Serial connection (AW-HE120)
„
AW-HE120
LAN cable
(straight cable),
up to 1,000 m
External DC
power supply
12V IN LAN RS-422 PREVIEW
CCU
SIGNAL GND
AK-HRP200
„ Serial connection (camera recorder)
„
ROP cable
12V IN LAN RS-422 PREVIEW
CCU
SIGNAL GND
AK-HRP200
(continued)
AW-HE50/AW-HE60
Supplied
AC adapter
OUT
IN
V
PR
PB
Y
Supplied
AC adapter
1.
Connect the RS-422 connector <RS-422> of the unit and
the camera (AW-HE50/ AW-HE60). Connect a LAN cable
(option) via a multi interface cable (AW-CA20T6, option)
connected to the MULTI-I/F connector <MULTI-I/F> of
AW-HE50/ AW-HE60 and a RJ-45 relay adapter (option).
2.
When you have finished connecting the equipment, turn
on the power of the camera and the power of the unit.
<Note>
• The multi-interface cable (AW-CA20T6G) is required for a serial
connection with a remote camera (AW-HE50/AW-HE60).
• Use a straight cable (category 5 or better shielded cable) for the LAN
cable.
1.
Connect the RS-422 connector <RS-422> of the unit and
the camera (AW-HE120). Connect a LAN cable (option) to
the RS-422 connector of AW-HE120.
2.
When you have finished connecting the equipment, turn
on the power of the camera and the power of the unit.
<Note>
Use a straight cable (category 5 or better shielded cable) for the LAN
cable.
1.
Connect the CCU connector of the unit to the connector
on the camera recorder using an ROP cable (option).
39