Brother DCP-J4110DW Service Manual page 256

< Requirements >
(1) USB cable (one piece)
®
(2) PC (Windows XP or later)
Create a temporary folder in the C drive.
(3) Service setting tool (brusbsn.zip)
Make a copy of the service setting tool in the temporary folder in the C drive. Extract the
copied file and run it by double-clicking.
(4) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(5) Maintenance driver (MaintenanceDriver.zip), if not installed
Make a copy of the maintenance driver in the temporary folder in the C drive. Extract the
copied file and install it, referring to
PRINTER DRIVER"
(6) Firmware
LZXXXX_$.pjl (For installing firmware using an external memory or PC)
LZXXXX_$.upd (For installing firmware using a PC)
(7) USB flash memory or SD card
(8) Stylus for touch panel
(9) Print data (Corrugate_BHS13.prn) for adjustment of vertical print lines/software correction
for inclination, corrugation and ruled lines.
(10) Print data for adjusting paper feeding correction values
For A4-sized paper:
For letter-sized paper: pfadj1_LTR_BHS13.prn and pfadj2_LTR_BHS13.prn
(11) Print data for adjusting margins in borderless printing
For A4-sized paper:
For letter-sized paper: mediaadj_LTR_BHS13.prn
(12) Print data for writing head calibration data
head_calib1_BHS13.prn
head_calib2_BHS13.prn
(13) ADF copy chart data (chart_BHS13.prn)
APPENDIX 3. "INSTALLING THE MAINTENANCE
.
pfadj1_A4_BHS13.prn and pfadj2_A4_BHS13.prn,
mediaadj_A4_BHS13.prn
4-2 Confidential