Brother DCP-J4110DW Service Manual page 59

Error Code 13

Paper Jam
Defective during duplex-printing
Registration sensor detects paper feed condition at out of specified timing during switchback.
User Check
- Check whether the recording paper being used is within the specification.
Step
1 Registration actuator caught on
the surrounding parts
2 Registration sensor defective
3 Switchback actuator caught on the
surrounding parts
4 Sensor relay PCB defective
5 Main PCB defective
Error Code 15

Paper Jam
Eject jam during printing
Recording paper is not able to be ejected since it is longer than 840 mm when ejecting the paper
after occurrence of the error 17.
User Check
- Remove the jammed paper.
- Check whether the recording paper being used is within the specification.
Step
Foreign materials in the recording
1
paper path
2 Main PCB defective
Cause
Set the registration actuator into place.
Replace the registration sensor PCB ASSY.
Set the switchback frame ASSY into place.
Replace the sensor relay PCB ASSY.
Replace the main PCB ASSY.
Cause
Remove foreign materials.
Replace the main PCB ASSY.
2-22
LCD
Solution
LCD
Solution
Confidential