Brother DCP-J4110DW Service Manual page 350

Selector
No.
1
Not used.
2
3 Black ink print mode
4 Automatic purging for color ink
5 Not used.
6
Periodical purging interval
7
8 Automatic purging for black ink
• Selector 3: Black ink print mode
If any color ink runs out, printing is no longer possible by default. Setting this selector to
"1" allows the machine to function as a monochrome printer, making it possible to print
with black ink only even in a "Replace Ink" state as listed below.
Printing FAX message received
Printing from a PC
Copying
Printing from memory cards
Printing via PictBridge
Printing lists
Purge operation
Tip: Difference between selector 3 on AMS04 and selector 8 on WSW49 (For details, refer
to the "Worker Switches (WSW)" document separately issued.)
Both selector 3 on AMS04 and selector 8 on WSW49 specify the similar black ink print
mode that applies if any color ink runs out. The difference is that the former allows the
machine to print all data received as a monochrome printer with black ink only; the latter to
ignore the "Replace Ink" state, receive both color and black data, and print it, resulting in a
printout missing color components.
• Selectors 4 and 8: Automatic purging for color ink and for black ink
The machine periodically performs an automatic purge by default. The automatic purge,
however, wastes ink when no printing has occurred. To avoid it, disable the automatic
purge with these selectors. In the first printing after a long no-print period, disabling it may
lower the print quality.
Setting selector 4 or 8 to "1" disables the setting made by selectors 6 and 7.
AMS04
(Maintenance assurance 2)
Function
Monochrome printing only possible. (A color FAX message will
be printed in monochrome.)
No printing possible.
Monochrome printing only possible. The Mono key is enabled,
but the Color key is disabled.
No printing possible.
No printing possible.
Monochrome printing only possible.
Purge operation possible for black ink only, not possible for all-
color or any specific color.
5-71
Setting and Specifications
0: Disable (default)
0: Enable (default)
No. 6 7
0 0 : Prescribed purge intervals
0 1 : 30 days (black), 60 days (color)
1 0 : 30 days (black), no purge (color)
1 1 : No purge (black and color)
0: Enable (default)
1: Enable
1: Disable
1: Disable
Confidential