Brother DCP-J4110DW Service Manual page 55

Code 1 Code 2
Remote terminal only with V.29 capability in 2,400 or 4,800
32 01
bps transmission.
32 02 Remote terminal not ready for polling.
Remote terminal not equipped with password function, or
32 10
password function switch is OFF.
Remote terminal not equipped with or not ready for
32 11
confidential mailbox function.
Remote terminal not equipped with or not ready for relay
32 12
function.
32 13 No confidential mail in the remote terminal.
The available memory space of the remote terminal is less than
32 14 that required for reception of the confidential or relay broad-
casting instruction.
32 15 Remote terminal not equipped with cipher receiving function.
32 16 Remote terminal not equipped with SEP function.
32 17 Remote terminal not equipped with SUB function.
32 18 Remote terminal not equipped with color function.
40 02 Illegal coding system requested.
40 03 Illegal recording width requested.
40 05 ECM requested although not allowed.
40 06 Polled while not ready.
40 07 No document to send when polled.
40 10 Nation code or manufacturer code not coincident.
Group number not registered in relay broad-casting
40 11 commanded, or commanded total broad-casting number
exceeds maximum broadcast enabled number.
40 12 Retrieval while not in retrieval stand-by.
Received polling from other maker products during
40 13
confidential polling stand-by.
40 14 No common key registration when using common key.
Red-black receiving requested while red-black receiving is
40 15
disabled.
Cipher communication requested while cipher receiving is
40 16
disabled.
40 17 Invalid resolution selected.
40 20 Invalid full-color mode requested.
Cause
2-18
Refer to
page:
Section
4.9.3
"A
communicat
ions error
occurs"
Confidential