System Setup; Calibrating The Touch Screen Monitor; Calibrating The Touch Screen; Configuring Serum Indices - Siemens ADVIA 2400 Operator's Manual

8 System Setup

Calibrating the touch screen monitor

Use this procedure to calibrate the touch screen at your workstation.

Calibrating the touch screen

1. Right-select the
2. Select
3. Select the targets that display at the screen.
4. Select the check mark.
5. The touch screen is calibrated.

Configuring serum indices

Use the following procedure to obtain the same flagging levels used by
Siemens when evaluating method serum interferences
•
Use the Qualit. set button in the Analytical Parameters (Serum) window to set the
five different flagging levels for each serum index.
•
Use the Item (Test) and Factor boxes in the Analytical Parameters (Serum) window
to designate the test for the determination of serum indices.
•
Use the Serum indices area on the System Specifications Set window to determine
when the serum blank assay is run.
Refer to the System Configuration section of the online Operator's Guide for further
information.

Connecting to your host computer

1. Have your laboratory computer professional connect the host computer as described
in the publication titled LIS Interface Guide.
2. Use the Online Settings window to enter the communication parameters.
Use the Online settings window to determine which sample results and workorders to
transmit.
This feature allows you to transmit results when they are available. This is called
"real-time transmission."
If you do not want to use real-time transmission, you can always transmit the results
as a batch using the Review/Edit window.
174
touch-screen
.
Align
icon at the bottom right of the screen.
ADVIA 2400 Operator's Guide