Batch Transmission To A Host Computer; Printing Sample Data - Siemens ADVIA 2400 Operator's Manual

Batch transmission to a host computer

Use the Review/Edit window to transmit selected patient results. The data clean feature is
available to check the sample results for problems.

Printing sample data

The Print report window is only available from the supervisor logon. To print reports, go
to the Review/Edit window and use the Print report button.
CAUTION
Tests on the Print Report form must be in the same order as they appear at the System
Test List window, to avoid incorrect positioning of results on the print report. Do not
modify the order of the test names at the System Test list window after the initial
setup. Any repositioning of test names on the System Test list window could result in
associating already-run tests with the wrong test name.
1. At the Menu Panel, select
2. At the Review/Edit window, select the
3. At the Print Report window, select a Sample Type(T) and File Data(F).
a. If you select Archive in the File Data (F) field, the Filing File Name (I) field is
b. Select the
c. Select a file name at the Open window.
4. In the Specification range (R) field, select the
Range
5. In the Number entry format (N) field, select the
from the list.
6. In the Last no. entry format (E) field, select the
from the list.
7. In the Report Form File (O) field, select a print format for the report.
a. Select the
b. The Open window displays, defaulting to the ETC folder.
c. Two sample report formats are available:
d. Customer defined print formats also display in the folder.
e. At the Open window, select a file name for the report format.
f.
8. Enter a start number in the Start number (S) field and a last number in the Last
number (L) field.
Quality Control
Request
activated.
button.
Open
or from the list.
All
en button.
Op
• the Chart.frm file is formatted for a single sample.
• the Consoled.frm file is formatted for multiple samples.
Select Open.
, then select
Review/Edit
button.
Print Report
in the field and select
arrow
in the field and select a format
arrow
in the field and select a format
arrow
.
Input
87