Using The Sample Log; Viewing The Sample Log Entries; Searching The Sample Log - Siemens ADVIA 2400 Operator's Manual

Using the Sample Log

1. At the Menu Panel, select
2. Perform any of the following tasks at this window:
a. view the sample log entries
b. search the sample log
c. delete a specific sample log entry
d. delete all sample log entries
e. print a list of the sample log entries
f.
3. Close the window.

Viewing the sample log entries

1. In the list box, select the file containing the sample log entries you want displayed.
The file for the current day is selected automatically.
2. Select the types of sample entries you want to display:
a. Select
b. Select
c. Select
The following information is provided for each sample log entry:
Asp Date and Time
STT
CTT
3. To view entries for recently aspirated samples, select

Searching the sample log

1. Select the search condition(s) you want and enter the applicable information:
Sample ID
same as c0101).
Asp. Date
is the year (2006), MM is the month (01 to 12), and DD is the day (01 to 31).
Asp. Time
hour (00 to 24), MM are the minutes (00 to 60), and SS are the seconds (00 to 60).
You can enter an approximate aspiration time (for example, 14:00:00), but the time
entry must be complete (that is, 14:00 causes an error, it should be 14:00:00).
2. Select
84
Request
export the sample log entries
to view all sample entries.
ALL
to view patient and control sample entries.
Routine/Ctl
to view patient sample entries.
Routine Only
: Enter the sample identification. Search is case sensitive (C0101 is not the
: Enter the aspiration date using the format YYYYMMDD where YYYY
: Enter the aspiration time using the format HH:MM:SS where HH is the
.
Execute
, then select
Sample Log
External
SampleID
Description
Update
ADVIA 2400 Operator's Guide
.
Type
Rerun
Results
.